comparison of product
| Products name | FRP Gel coat panels |
| Products material | Unsaturated polyresin + glass fiber |
| color | RAL Customized |
| Design Style | Modern |
| Coating | uv protection |
| Technique | FRP continuous molding production line |
Factory Daylighting and Roof Sheet
EXPOSURE: UV index 11–12 all year · 2,000–3,000 mm annual rain · 35 °C with 85 % RH | RECOMMENDED GRADE: translucent profiled sheet, 1.2–1.5 mm, UV-stable
In a tropical factory the roof is the largest and cheapest source of light, and the material chosen decides whether that light is still there in ten years. Ordinary GRP without a UV barrier yellows and loses transmission within three to four years; polycarbonate crazes and becomes brittle; PVC sheet discolours and sags between purlins. A properly formulated GRP sheet keeps 90 % of its initial transmission after 3,000 hours of accelerated weathering, and it diffuses the light instead of focusing it.
UV - an acrylic-modified, UV-absorbing surface layer protects the laminate; transmission loss is below 10 % after 3,000 h to ISO 4892-3.
Monsoon rain - the panel is fixed with the same lap detail as the steel sheet around it, and the GRP does not dent or deform under rain load.
Heat - diffused transmission cuts glare and reduces the radiant heat that a clear polycarbonate roof delivers to the work floor.
Corrosion - in coastal or chemical plants the sheet survives the atmosphere that destroys galvanised steel in three to five years.
Condensation - fleece-backed grades absorb drips above packing and assembly areas, which is the main complaint about single-skin daylighting.
Recommended build-up. Profiled translucent sheet 1.2–1.5 mm in the profile that matches the roof (76/18, 130/30, 177/51 or trapezoidal 35/200); clear for maximum light, opal for diffused light, heat-reducing where solar gain must be limited; 10–15 % of roof area is the usual daylighting ratio.
Compliance note. External fire performance is tested to BS 476-7 (Class 1 surface spread of flame) and, where the project requires, to ASTM E108. For Singapore and Malaysia the sheet is supplied with the profile matching the locally rolled steel so that the roof can be laid in one continuous run.


Contact Ms. Sophia shi
sophia.shifei@gmail.com
sales02@frpexpert.com
Mob./WhatsApp: 0086 15930397073
Hot Tags: anti corrosion roofing sheet, China anti corrosion roofing sheet manufacturers, suppliers, factory





