How to ream the plate?

As a very high-quality building and equipment material, the general-purpose lighting board has extremely high strength and toughness. Even if it is very good, it will cause the board to crack along the nail hole due to the construction method, causing losses to users. It can be seen that drilling and reaming holes on the endurance board is a very important skill.

Considering that the raw material glass fiber of the lighting board will show the effect of thermal expansion and cold contraction, so when it is fixed, if it is directly nailed and fixed on the board surface without reaming, the possibility of quality problems in the later stage of the project is It is very high, so it is necessary to ream the plate when nailing.
So how to drill and expand holes on the lighting board? The simple way is to directly drill holes in the lighting board with an electric drill. You can choose a thicker drill bit, or shake it around a few times after the electric drill drills the hole to make the hole bigger. The diameter of the hole should preferably be 1/3 larger than the diameter of the nail. It takes about one or so.
For more information, welcome to follow us!